DeWalt DW080LRS User Manual page 18

Controlling the Laser Remotely
E
You can control the laser unit remotely in either of these 3 ways:
• From up to 50' away, you can use the remote to control the laser unit
(Figure ). IR sensors will maintain communication between the remote
I 1
and the laser unit.
• From up to 100' away, you can use the DEWALT
on your Bluetooth device to connect to the laser unit (Figure
®
• From up to 1100' away, you can control the laser unit by using the DEWALT
Tool Connect™ Application on your Bluetooth
that is connected to the laser unit (Figure
button (Figure
A 6
laser unit.
Controlling the Laser from up to 50' Away
The DW080LRS/LGS remote control allows you to operate and set up the laser
from up to 50' away. The LED light on the remote control (Figure
a signal is being transmitted from the DW080LRS/LGS laser unit.
NOTE: Whenever the Bluetooth
NOT be able to use the remote.
Any remote could control the laser unless the laser is paired to one remote.
• If the laser is not paired to the remote, LEDs on the laser and the remote will
indicate that they are not paired.
• The unlocked LED (Figure
indicate that any remote can control the laser (Figure
• The lock/unlock LED on the remote (Figure
• If the laser is paired to the remote, LEDs on the laser and the remote will
indicate that they are paried.
• The locked LED (Figure
indicate that currently only one remote can control the laser (Figure
• The lock/unlock LED on the remote (Figure
You can use all the buttons on the remote's keypad to control the laser unit. To
completely power OFF a DW080LRS/LGS laser unit using the Remote keypad,
press the X-Y axis button
(Figure ) simultaneously.
B 2
18
Tool Connect™ Application
®
device to connect to the detector
®
). You must press the Detector
I 3
) on the laser in order to connect the detector to the
connection is enabled on the laser, you will
®
) will be lit on the laser keypad to
A 5
J
) will NOT be lit.
B 8
) will be lit on the laser keypad to
A 4
) will be lit.
B 8
) and the Slope Mode button
(Figure
B 5
Controlling the Laser from up to 100' Away
You can use Bluetooth
application on your cell phone, and then use your cell phone to control the laser
(Figure ).
I 2
1. From either
Tool Connect™ application to your cell phone.
).
I 2
2.
On the laser's keypad, press
®
3.
On the laser's keypad, press
connection. (If the Bluetooth
battery (3V CR2430) on the bottom of the laser.)
4.
Using the D
Laser) and pair your cell phone to the DW080LRS/LGS.
5.
When the laser is on, the DEWALT
information about the laser:
) indicates
• A laser safety icon to let you know the laser is on.
B 1
• The laser's current settings for RPM, Slope, etc.
• If the current settings are one of the "favorite settings" you have saved for
the laser, it will display the name of that setting (e.g., Main St - Site 1).
• If the laser is dropped, disturbed, etc., it will send messages to the Tool
Connect™ application to inform you.
• If the Tracking feature is on, the application will know where the laser is and
will let you know if the laser has been taken and is now out-of-range.
).
Controlling the Laser from up to 1100' Away
You can use Bluetooth
Connect™ application on your cell phone, and then use your cell phone to control the
laser (Figure
I
).
1. From either
K
Connect™ application to your cell phone.
2.
On the laser keypad, press
3.
On the laser's keypad, press
the detector.
4. On the detector's keypad, press
connection.
capability to pair the laser with the D
®
or
to turn the laser on.
(Figure
A 7
connection does not turn on, replace the coin cell
®
WALT Tool Connect™ application, select the product type (Rotary
®
E
Tool Connect™ application will display
®
capability to pair the detector with the D
®
).
3
or
to turn the laser on.
(Figure
A 6
(Figure
F
WALT Tool Connect™
®
E
, download the D WALT
®
E
) to turn on the Bluetooth
®
WALT Tool
®
E
, download the D WALT Tool
®
E
) to turn on the connection to
) to turn on the Bluetooth
®
2