Removing & Reattaching
REATTACHING
THE GRASS CATCHER
Models with out 3-Point Hitch
1. Set the front and back plate assembly on the pins
(Figure 19).
2. Secure with the long hitch pin (C, Figure 19)
Models with 3-Point Hitch
1. Set the front and back plate assembly on the clevis
pins (Figure 20).
2. Secure with the hitch pin (C, Figure 20).
A
Figure 19. Install Back Plate, without 3-Point Hitch
A. Hair Pin Clip
B. Back Plate
C. Hitch Pin
D. Lower Spacer
A
F
Figure 20. Install Back Plate, with 3-Point Hitch
A. Hair Pin Clip
B. Back Plate
C. Hitch Pin
D. Clevis Pin
E. Lift Arm
F. 3-Point Hitch
10
B
D
C
E
Lift arm must
be above lower
hole.
D
B
C