4.3 Optional Accessories / Replacement Parts GETTING STARTED 5.1 Getting to Know Your Apollo+ Series 5.2 Before Using Your Apollo+ Series for the First Time 5.3 Powering ON / OFF an Apollo+ Series 5.4 Apollo+ Series Battery Status Indication 5.5 Charging the Battery Pack 5.6 Replacing the Battery Pack...
Page 4
7.6 Main Menu Window – Time and Date Setup 7.7 Main Menu Window – Memory Options DOWNLOADING YOUR APOLLO+ SERIES 8.1 Downloading From Your Apollo+ Series to PATGuard 3 8.2 Downloading Clone Data from an Apollo 500+ or 600+ UPLOADING YOUR APOLLO 500+ AND 600+ 9.1 Uploading from PATGuard 3 to an Apollo 500+ or 600+...
15 UPDATING YOUR FIRMWARE 16 ELECTRICAL SPECIFICATION 17 USEFUL INFORMATION 17.1 Factory Set Test Sequences 17.2 Other Information 18 ENVIRONMENTAL CONDITIONS 19 MAINTENANCE 19.1 Securing the Apollo+ Series 19.2 Cleaning the Apollo+ Series 20 SERVICE AND CALIBRATION. 20.1 Calibration Statement 21 ONLINE RESOURCES...
Page 15
The battery pack will be charged whenever the Apollo+ Series is connected to the Mains Supply regardless of whether the instrument is switched ON or OFF. The typical charging current is set to 500mA but this may vary as the instrument also includes precharge and top up charge modes.
Page 30
7.4.1 How to Setup a Printer with your Apollo+ Series...
Need help?
Do you have a question about the APOLLO+ Series and is the answer not in the manual?
Questions and answers