Yamaha SB168-ES Quick Setup Manual page 4

Set the SB168-ES ID#s and connect all devices as follows, and then turn on all the devices.
ID #1
ES IN
Connect a microphones,
amps, and speakers.
Connect the Ethernet port of a PC
and MY16-ES64 with a CAT5e cable.
SB168-ES and LS9 Quick Setup Guide
Set an ID for each SB168-ES unit via
the DIP switches.
#1 will route to Slot 1and #2 to Slot 2.
ID#s can be in either order.
CAT5e cable
MY16-EX #1
Connect the ES port of LS9
and two SB168-ES units in a
daisy chain with CAT5e cables.
MY16-ES64
ES OUT
Install the two MY cards into LS9.
Connect the two MY cards with
CAT5e cables.
3
ID #2
ES OUT ES IN