Yamaha SB168-ES Quick Setup Manual page 3

Step 1: Device Setup and Connections
Set the MY cards as follows.
DIP switch setting of MY16-ES64
DIP switch setting of MY16-EX
SB168-ES and LS9 Quick Setup Guide
Set SW1 to the [422] position.
Set SW2 to the [48K] position.
Set SW3 to the [Emu.] position.
Set SW4 to the [OnChip] position.
Leave SW201 permanently set to the
[OFF] position.
Set SW1 to the [1] position.
Set SW2 to the [48K] position.
Set SW3 to the [Emu.] position.
Leave these switches permanently set to
the [OFF] position.
2