Cocraft LXC RS18 18V Lithium Series Original Instructions Manual page 5

5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Specific safety instructions for reciprocating saws
Important: Always remove the battery from the power tool before adjusting, servicing
or repairing it.
a) Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
b) Hold power tool by insulated gripping surfaces, when performing an operation where
the cutting accessory may contact hidden wiring. Cutting accessory contacting a
"live" wire may make exposed metal parts of the power tool "live" and could give
the operator an electric shock.
c) Keep your hands away from the blade and other moving parts. Do not reach under
the workpiece being sawed. The blade or your hand could be out of your sight.
d) Never put your hand or finger between the pendulum arm and gearbox. There is
a risk of crushing.
e) Do not saw into walls or other places where there might be hidden electric cables.
If it is necessary to saw in any case: Remove all fuses and cut off all the power
supply to any wiring circuits which may be hidden behind the wall. Grip only
the plastic parts of the reciprocating saw. Never grip any metal parts of the saw
when cutting in areas where there might be live electrical wires.
f) Do not use blunt or damaged saw blades. Bent saw blades can easily break or
cause kickback.
g) Start the saw and let it get up to speed before starting to cut.
h) Clamp down any small workpieces before starting to cut them.
i) Make sure that the settings are correct and that the blade is securely fastened in
the blade holder before beginning to saw.
5