Table of Contents
Advertisement
Additional Features
In addition to the basic features mentioned in previous sections, VZAccess Manager has the additional features listed
below.
The Status Bar
The details of your current connection can be seen in the status bar at the bottom of the VZAccess Manager
interface. This status bar is always visible when the interface is fully expanded. For information on minimizing the
VZAccess Manager interface, see the section "Minimizing the Interface."
Most users will see the following "NationalAccess - BroadbandAccess" version of the status bar:
Connection Status
The text on the bottom left portion of the status bar below the "Verizon Wireless" text reflects your current state.
During an active connection, this text will change to "Connected." If you are not connected, it will display "Not
Connected."
WWAN Express Card Status Area
The text that reads "Verizon Wireless" can change to the following:
• Device not inserted - Your WWAN Express Card is removed from the notebook.
• Device not activated - Your Express Card needs to be activated. Select Activate from the Options menu.
Coverage
For Express Cards, an icon will be displayed if you are in NationalAccess or BroadbandAccess coverage. However,
the mouse pointer over these icons to see the tool tip showing the current coverage.
NDIS
The following icons also appear on the status bar to indicate your device's NDIS status:
NDIS is enabled and connected
NDIS is enabled but disconnected
(No NDIS image)
NDIS is disabled.
AUTHOR: ISMS: V640_UGcontent_rev1[B]
52
Advertisement
Table of Contents
