Setup And Installation - Bally The MultiPin Virtual Pinball Machine User Manual

Remove the packaging from the Multipin. Sit the unit
flat on the floor and then rotate backwards so the
back of the cabinet is on the floor. Hold the backbox
securely while you do this.
Ask a strong assistant to prop the back of the machine
up on his knee. Attach the rear legs with two bolts in
each leg.
Setup & Installation
Attach the two front legs using two bolts in each leg.
Rotate the machine forwards so it is sitting on the front
legs.
Rotate the backbox vertically and fasten the four bolts
inside the backbox to fix it. The machine is now ready to
plug in and switch on.
Locate the ON/OFF switch on the back of the machine
next to the main power lead and turn it on. After a few
seconds you will see the main pinball menu.