Precautions For Use - BITMAIN APW3-12-1600 Series User Manual

PSU

7 Precautions for Use

1. Before using the PSU, please ensure that the voltage and power outputs are compatible
with your equipment.
2. Please ensure that the PSU appears to be in good shape and has not suffered damage in
transit. If the exterior of the PSU appears damaged, do not use it.
3. Make sure that the metal cover for the PSU with on/off switch is properly grounded.
Improper grounding is dangerous.
4. The PSU must be installed in such a way that it receives good, unobstructed airflow.
Under no circumstances should the PSU be installed in an enclosed place.
5. When installing the PSU, please double check that the output polarities are the correct
way round, and that the screws are fastened securely in place.
6. Do not attempt maintenance on any wiring while the PSU is powered up from the mains.
7. Running the PSU at <80% load or below can greatly prolong the life of the PSU. Usually,
for every 10ºC above the rated amount, the life of the PSU is cut in half.
APW3-12-1600 Series
May 14, 2015 Version 1.1
Page 8 / 9