Using The Remote Control; Do's And Don'ts - Multivet Spray Commander Instruction Manual

Using the Remote Control

• The upper button (position no 1) emits a sound signal.
• The center button (position no 2) sends a short spray.
• The lower button (position no 3) sends a long spray.
Note:
Check if the device is working by pressing the upper button (A)
on your remote control; you should hear a beep.
The Spray Settings - The spray is used to interrupt the dog and redirect his
attention. The more a dog seems absorbed by his activity, the longer the spray will
have to be to stop and correct his behavior, and to redirect his attention.
No programming needed - Your Spray Commander device and remote control
are now pre-programmed to make their use easier for you and your pet!
Adjust the device onto the dog's neck with the Spray Commander logo facing
inward. Make sure the spray nozzle is pointing towards the dog's snout.
Turn the device on.
DO'S AND DON'T'S
• Go through the entire training CD before using your Spray Commander to truly
understand the product and how it can work for you and your pet.
• Never infl ict punishment, pain or cruelty on your pet – even if he refuses to listen.
Have patience and follow the training tips provided.
• Reward your pet when he listens and obeys your commands.
• Never let the dog ignore a command he understands.
• Do not use the spray when you want your dog to obey a command that he does
not understand yet.
A