Sony HDVF-EL70 Operation Manual page 35

4
Turn the viewfinder to a random position.
Handle
Base portion
3
4
Notes
Make sure that the viewfinder is securely locked. If the
viewfinder is not properly attached to the camera, it may
fall and cause injuries.
To remove the viewfinder
1
Return the viewfinder screen to the standard
position.
2
Fix the viewfinder screen in the standard position by
turning the tilt-lock knob and lift-lock knob in the
direction of the arrow indicated on each knob
(toward the lock position).
Standard position: The
screen's height and
position are fixed fully
back, as illustrated.
1
3
Turn the viewfinder fully clockwise.
2
Tilt-lock knob
2
Lift-lock knob
4
Turn the slide position knob clockwise to
and turn the slide-lock knob counterclockwise to
release the lock of the slide position.
Slide position
knob
SLIDE
STOP
FREE
COUNTER BLANCE
5
Slide the viewfinder so that the lever is seen through
the slit in the panning base mounting plate (see
illustration in step 6). Then turn the slide position
knob counterclockwise to
slide position.
6
While pressing the lever, pull the handle of the
viewfinder toward you then lift the viewfinder to
remove it.
5
SLIDE
STOP LOCK
FREE
COUNTER BLANCE
FREE,
Slide-lock
knob
LOCK
STOP to secure the
6
Lever
35
Attaching to the Camera