Regulatory Standards Compliance; Safety And Electromagnetic Compatibility (Emc); Telecommunications; Regulatory Statements - Lucent Technologies PacketStar PSAX DS1/E1/DS0A CES Module User Manual

Regulatory Standards Compliance

Safety and Electromagnetic Compatibility (EMC)

Telecommunications

Regulatory Statements

USA Regulatory Statements

FCC Part 68

®
PSAX 12-Port Medium-Density DS1/E1/DS0A CES Module User Guide (DS1 Mode), Issue 1
PacketStar
255-700-379
text in the PacketStar PSAX user and installation guides for other important
safety information and procedures.
The following PacketStar PSAX systems are compliant with applicable safety
and EMC standards when configured with the 12-Port Medium-Density
DS1/E1/DS0A CESmodule (model 24N64):
• PSAX 1000 system
• PSAX 1250 system
• PSAX 2300 system
• PSAX 4500 system
Please refer to the appropriate PacketStar PSAX Multiservice Media Gateway
user guide or installation guide for additional information.
• FCC Part 68 (USA)
• CS-03 Issue 8 (Canada)
This equipment complies with Part 68 of the FCC rules. On the back of the
PSAX chassis is a label that contains the FCC registration number, in addition
to other information. You must provide this information to the telephone
company, if they request it. The FCC requires Lucent Technologies to provide
you with the following information:
1. This equipment has digital service interface capabilities using RJ-48C
and RJ-48H connectors. The facility interface codes with which this
equipment complies for digital services are as follows: 04DU9-BN,
04DU9-DN, 04DU9-1KN, and 04DU9-1SN. This equipment has loop
start interface capabilities using an RJ-11C connector. The facility inter-
face code with which this equipment complies for service is 02LS2. The
service order codes for this equipment are 6.0F for the T1 interface and
9.0Y for the loop start interface.
2. An FCC-compliant telephone network interface jack is built into this
equipment and is compatible with interconnections that are Part 68
compliant.
Release 8.0.0
v