Module Alarm Status Table; Quality Of Service (Qos) Information Tables; Alarm Status Descriptions For Modules On The Equipment Configuration Window - Lucent Technologies PacketStar PSAX DS1/E1/DS0A CES Module User Manual

Appendix B Reference Information

Module Alarm Status Table

Module Alarm Status Table
Table B-7. Alarm Status Descriptions for Modules on the Equipment Configuration Window
Number Alarm Status
1 NoAlarm
2 WrongCardType
3 LineFailed
4 CardRemoved
5 ReferenceClockFailed
6 CompositeClockFailed
7 Overload
8 Plus5vFailed
9 Plus120vFailed
10 Minus48vFailed
11 UnknownAlarm
12 CompleteClockFailed
14 PowerFailed

Quality of Service (QoS) Information Tables

®
PSAX 12-Port Medium-Density DS1/E1/DS0A CES Module User Guide (DS1 Mode), Issue 1
PacketStar
B-24
The alarm status descriptions for the Alarm Status field on the Equipment
Configuration window are provided in Table B-7. When underscored num-
bers are displayed in this field, they represent one or more ports on the mod-
ule that currently have a loss of signal.
Module Type
Affected
I/O
I/O
All
All
Stratum
Stratum
Power Supply The Power Supply is operating under an
Power Supply The 5 V dc Power Supply output has failed.
Power Supply The 120 V ac Power Supply input has failed.
Power Supply The -48 V dc Power Supply output has failed.
I/O
Stratum
Power Supply Power failed
Table B-8 details the PSAX system support of defined ATM QoS classes.
Description
NoAlarm indicates that the module is
inserted in the chassis slot and not config-
ured.
One type of module was configured in this
slot in the chassis, but a different module
now occupies this slot.
The line has failed.
A module has been configured and then
removed.
The timing reference clock has failed.
The timing composite clock has failed.
overload condition.
The reason for failure is not known.
The backplane has detected a clock error.
Release 8.0.0
255-700-379