Table of Contents
Advertisement
ThinkSystem 1610-4P NVMe Switch Adapter Installation and User Guide
February 28, 2018
2.3.3
LED Management
The internal-connector ThinkSystem 1610-4P NVMe switch adapter offers LED management support for your
backplane implementation. This configuration option lets you use the adapter with backplanes configured for the I
interface. The adapter complies with the I
The adapter offers enclosure LED management support for your enclosure implementation through I
2.4
Operating System Support
The ThinkSystem 1610-4P NVMe switch adapter supports all major operating systems. Refer to
http://support.lenovo.com
2.5
ThinkSystem 1610-4P NVMe Switch Adapter Characteristics
2.5.1
Flash Memory
The ThinkSystem 1610-4P NVMe switch adapter provides a 128-MB Flash memory device for storing the BCM58512
CPU BIOS and firmware.
2.5.2
Physical Characteristics
The ThinkSystem 1610-4P NVMe switch adapter is a 6.6 in. × 2.7 in. (167.65 mm × 68.90 mm) board. The component
height on the top and bottom of the adapter complies with the PCIe specification. The following figure shows the
ThinkSystem 1610-4P NVMe switch adapter layout.
Figure 5 ThinkSystem 1610-4P NVMe Switch Adapter Layout
J1– SFF-8643 mini-SAS HD internal connectors
U5– PCIe x16 board edge connector
2
C-bus specification and user manual Rev. 6 — 4.
for details on the software versions and device driver support.
3_03265
U5
J1
- 9 -
Operating System Support
2
C0
C1
C2
C3
Chapter 2: Overview
2
C
C management.
Advertisement
Table of Contents
