Related Manuals for Lenovo ThinkSystem 440-16i
Summary of Contents for Lenovo ThinkSystem 440-16i
- Page 1 ThinkSystem 440-16i SAS/SATA PCIe Gen4 12Gb Internal HBA Installation and User Guide...
- Page 2 First Edition (May 2020) © Copyright Lenovo 2020. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-...
-
Page 3: Table Of Contents
Table of Contents Chapter 1: Overview ........................... 1 Operating System Support ..........................1 PCIe Host Interface ............................. 1 LED Management ..............................2 Storage Interface Features ..........................2 Adapter Characteristics ............................3 Chapter 2: Adapter Installation Instructions ..................4 Chapter 3: Safety Characteristics ..................... 6... -
Page 4: Chapter 1: Overview
Chapter 1: Overview The ThinkSystem 440-16i SAS/SATA PCIe Gen4 12Gb internal HBA, based on the SAS3816 controller, is a high- performance PCIe-to-SATA/SAS storage adapter. The SerDes technology enables operation of SAS and SATA storage devices in a single drive bay. A single controller can operate in all two modes concurrently: SAS and SATA. The adapter... -
Page 5: Led Management
Configurable SSC SATA interface features: – SATA and STP data transfers at 6Gb/s and 3Gb/s – Addressing of multiple SATA targets through an expander © Copyright Lenovo 2020 ThinkSystem 440-16i SAS/SATA PCIe Gen4 12Gb Internal HBA Installation and User Guide... -
Page 6: Adapter Characteristics
J17 (C1) J6 (C2) J5 (C3) LED2 LED3 Figure 1 Card Layout for the Thinksystem 440-16i SAS/SATA PCIe Gen4 12Gb Internal HBA The following table describes the headers and connectors on the adapter. Table 2 Headers and Connectors Connector Type... -
Page 7: Chapter 2: Adapter Installation Instructions
1. Unpack the adapter and inspect the adapter for damage. Unpack the adapter in a static-free environment. Remove the adapter from the antistatic bag, and carefully inspect the adapter for damage. If you notice any damage, contact Lenovo or your reseller support representative. ATTENTION To avoid the risk of data loss, back up your data before you change your system configuration. - Page 8 11. Reconnect any external cables and turn on the power to the system. The hardware installation of your adapter is complete. © Copyright Lenovo 2020 ThinkSystem 440-16i SAS/SATA PCIe Gen4 12Gb Internal HBA Installation and User Guide...
-
Page 9: Chapter 3: Safety Characteristics
UL flammability rating. For the boards installed in a PCIe bus slot, all voltages are lower than the SELV 42.4 V limit. © Copyright Lenovo 2020 ThinkSystem 440-16i SAS/SATA PCIe Gen4 12Gb Internal HBA Installation and User Guide... - Page 10 Trademarks LENOVO, LENOVO logo, and THINKSYSTEM are trademarks of Lenovo. All other trademarks are the property of their respective owners. © 2020 Lenovo. © Copyright Lenovo 2020 ThinkSystem 440-16i SAS/SATA PCIe Gen4 12Gb Internal HBA Installation and User Guide...