Connectors; Electrical Characteristics; Thermal And Atmospheric Limits; Thinksystem 1610-4P Nvme Switch Adapter Certifications And Safety Characteristics - Lenovo ThinkSystem 1610-4P Installation And User Manual

ThinkSystem 1610-4P NVMe Switch Adapter Installation and User Guide
February 28, 2018
2.5.3

Connectors

NVMe Connector (J1). The ThinkSystem 1610-4P NVMe switch adapter supports connection to four NVMe devices
through four SFF-8643 mini-SAS HD connections
PCIe Connector (U5). The ThinkSystem 1610-4P NVMe switch adapter supports a x16 interface. The PCIe host interface
connection is through the U5 edge connector. The signal definitions and pin numbers conform to the
PCIe specification.
2.5.4

Electrical Characteristics

The power requirements for the ThinkSystem 1610-P4 NVMe switch adapter under normal operation are as follows:
Power values:

Typical = 16.2 W
—
Typical configuration assumes nominal silicon and voltage with all links running maximum I/Os at 25°C ambient
temperature. Actual power consumption might vary depending on system and environmental configurations.
2.5.5

Thermal and Atmospheric Limits

The atmospheric limits for the ThinkSystem 1610-4P NVMe switch adapter are as follows:
Relative humidity range: 5% to 90% noncondensing

Maximum dew point temperature: 32°C (89.6°F)

Minimum airflow: 300 linear feet per minute at 55°C inlet temperature

The following limits define the storage and transit environment for the ThinkSystem 1610-4P NVMe switch adapter:
Temperature range: –45°C to +105°C (–49°F to +221°F) (dry bulb)

Relative humidity range: 5% to 90% noncondensing

2.6 ThinkSystem 1610-4P NVMe Switch Adapter Certifications and Safety
Characteristics
All ThinkSystem 1610-P4 NVMe switch adapters meet or exceed the requirements of UL flammability rating 94V-0. Each
bare board is marked with the supplier's name or trademark, type, and UL flammability rating. Because these boards
are installed in a PCIe bus slot, all voltages are less than the SELV 42.4V limit.
The design and implementation of the adapter minimizes electromagnetic emissions, susceptibility to radio frequency
energy, and the effects of electrostatic discharge.
The adapter meets the following integrated electromagnetic interference (EMI) compliance labels:
CE mark

RCM mark

Canadian Compliance Statement

FCC Class B, marked with the FCC Self-Certification logo

UL Listed Mark for Canada/U.S.

Japan VCCI

Korean KCC

Taiwan BSMI


ThinkSystem 1610-4P NVMe Switch Adapter Certifications and Safety Characteristics

- 10 -
Chapter 2: Overview