Vittorazi Motors Easy100 Owner's Manual page 19

7.8 Pull starter Easy100
Progress in analogous way to the model Fly100evo. Then loosen the knot, rotate the
pulley to lose the tension of the spooling spring. Unscrew the central bolt, remove the
cover, the two cammes and their springs, then with the help of a small screwdriver to
hold back the spooling spring and remove the pulley. Add some grease to the spring, to
the pivot, the cammes. You remember the sequence and the position of all the
components of the starter. Once assembled pulley, cammes, springs and cover, you
insert the screw and verify the sliding of the system. You load through the pulley, the
spooling spring of 2 exact turns, inserts the rope in the eyelet and marks the rope.
Check the wear of the aluminium toothed gear, shown in figure 7.8
7.8 / pull starter Easy100
7.9 Electric starter
The electric starter engine could wear the brushes or the components of mechanical
transmission. Will be supplied in both the cases the spare parts to regenerate the motor.
19