Wireless LAN Array
Mark the Wall Position
Use the Wall Mounting Bracket as a template and mark the locations on
1.
the wall for the mounting holes.
When marking the holes, ensure that the mounting plate is level—you
may need assistance.
The bracket must be secured to the wall in at least 5 places, using a minimum
of the top 3 holes and the 2 outside holes at the bottom. For maximum strength,
use all 8 mounting points (8 toggle bolts are provided).
Installing the Xirrus Array
Mark holes (at least 5 places)
Figure 39. Wall Mount—Marking the Holes
61