Xirrus XS-3900 User Manual page 118

Wireless LAN Array
e. Configuration Server Protocol: Choose DHCP to instruct the Array
to use DHCP
Static IP if you intend to enter IP addresses manually.
IP Address: If you selected the Static IP option, enter a valid
IP address for the Array. To use any of the remote
connections (Web, SNMP, or SSH), a valid IP address must be
established.
IP Subnet Mask: If you selected the Static IP option, enter a
valid IP address for the
is 255.255.255.0). The subnet mask defines the number of IP
addresses that are available on the routed subnet where the
Array is located.
Default Gateway: If you selected the Static IP option, enter a
valid IP address for the
address of the router that the Array uses to transmit data to
other networks.
2. Click on the Apply button to apply the new settings to this session.
3. Click on the Save button to save your changes (otherwise your new
settings will not take effect).
Configuring the Xirrus Array
when assigning IP addresses to the Array, or choose
subnet mask
default
(the default for Class C
gateway. This is the IP
83