Table of Contents
Advertisement
Wireless LAN Array
8.
DTIM Period: A DTIM (Delivery Traffic Indication Message) is a signal
sent as part of a beacon by the Array to a client device in sleep mode,
alerting the device to a
in the DTIM Period field, between 1 and 255. The value you enter here is
applied to all radios.
9.
Station Re-Authentication Period: This option allows you to specify a
time (in seconds) for the duration of station reauthentications.
10.
Station Timeout Period: Specify a time (in seconds) in this field to define
the timeout period for station associations.
11.
Max Station Association per IAP: This option allows you to define how
many station associations are allowed per IAP (up to 64 stations per IAP).
12.
Block Intra-Station Traffic: This option allows you to block or allow
traffic between wireless clients that are associated to the Array.
Load Balancing: This option enables or disables active load balancing
13.
between the Array IAPs.
14.
Click on the Apply button to apply the new settings to this session.
15.
Click on the Save button to save your changes (otherwise your new
settings will not take effect).
Configuring the Xirrus Array
packet
awaiting delivery. Enter the desired value
95
Advertisement
Table of Contents
