Assembly; O Ut O F B Ox S Etup; T Ool A Rrangement - Kaivac 1250 Operator's & Parts Manual

2.1 o o B s
ut f ox etuP
accessory Box: Open Box and remove contents. Listed below are
placement instructions. Tote Bag can be removed and filled with
remaining tools; set aside.
Placards
Window squeegee
Blow nozzle
Gulper tool
Place Placards
around Push handles after removing the machine from the container,
attach the Plastic elbow to the Vacuum Tank as
of your Kaivac
Machine. shown above.
PrEss
doWn
turn
Ensure dump hose is
secured to the
cap-and-tether.
Remove Window Squeegee, KaiDrain and Blow Nozzle
from accessory Box, and place them in the appropriate
locations as shown above.
P a g e | 8

2.0 Assembly

after removing Vac Wand
from accessory Box,
assemble it by sliding the
sections together until the
Locking Pin engages, then
insert the Brush Head and
screw firmly as shown.
Plastic Elbow installation
for KV1250 shown above.
attach Vacuum Motor hose to elbow.
Setup for KV1250.
nose
Make sure Vac Lid jug holders are
firmly on Vacuum Tank, and place
remaining tools into Tote Bag to hang
on nose.
Customer/Technical Support | 1-800-287-1136
2.2 t a
ool RRangement
1200 tool arrangement
Vac Squeegee
Vac Wand
(with Brush)
(OFVWGB)
(VBRUSh)
KaiDrain
Vac hose
(CVS14)
(VhST45)
Window Squeegee
(Caa06)
Electric Cord GFCI
(GFCI25)
Universal Fill Hose
(UFH)
1700 and 2700 tool arrangement
Vac Squeegee
Vac hose
(with Brush)
*1700 Series: (Vh25) (hC5) (VhST20)
(VBRUSh)
Vac Wand
*2700 Series: (Vh40) (hC5) (VhKVjRST)
(OFVWGB)
Universal Fill Hose
(UFH)
KaiDrain (CVS14)
Window Squeegee
(Caa06)
Pressure hose
*1700 Series: (Ph45)
*2700 Series: (Ph75)
©2018 Kaivac, Inc. All Rights Reserved | www.kaivac.com
2.0 Assembly
Blow Nozzle (CVS13)
Spray Line
Placards
(Ph45)
(PLCRD)
Spray Gun
(SUBGaKW)
Blow Nozzle (CVS13)
Spray Gun
(SUBGaKW)
Electric Cord
Tool Cup
(CeS19a)
(WDVTC)
P a g e | 9