Systech Instruments EC900 series Operator's Instruction Manual page 30

EC900 Series Operation Manual
V4.7
This screen allows you to select or change the program group, Systech Illinois recommends that at
this point you accept the default setting and click on Continue.
Now the software will commence its installation process with the following screen:-
The blue bar shown indicates the installation progress. When it has reached 100% (which only takes
a few minutes) you will be presented with this screen, which indicates that the software has been
installed satisfactorily.
If during the installation phase you are presented with a screen that informs you that you are trying to
replace a file on your computer with one that is an older version than the one you have, always keep
the newer file.
Creating a Desktop Icon
If you wish to have an icon on the desktop to click in order to start the Systech_Illinois_Client follow
the following steps:-
Go to "Start", "All Programs", "Systech_Illinois_Client", and right click on Systech_Illinois_Client. Next
click on "Send to" and then click on "Desktop (create shortcut) as shown below. There will then be an
icon placed on your desktop to invoke the Systech_Illinois_Client program
Page
www.systechillinois.com
27