Quick Configuration - Edimax EW-7301APg User Manual

Quick Configuration

EW-7301APg/EW-7302APg is a dual mode system which can be configured either as a gateway or an access point
as desired. This section provides a step-by-step configuration procedure for basic installation on both CPE mode
and AP mode.
3.2.2.1. CPE Mode
Step 1: Mode Confirmation
Ensure the Operating Mode is currently at CPE mode; the web management UI can be viewed at
the Status section under the System Overview page.
Note: For more information in switching to CPE mode, if it is not currently active, please refer to
Section 5.1.2 – Operating Mode.
17
EW-7301APg/EW-7302APg
User Manual