General Settings - Edimax EW-7301APg User Manual

General Settings

EW-7301APg/EW-7302APg supports 802.11b, 802.11g, and 802.11b/g mode. Select the desired mode and
proceed further with information required respectively to set up the system.
•
Band: Select an appropriate wireless band, or disable if the service is not required; bands available are
802.11b, 802.11g, and 802.11b+802.11g.
•
SSID: Assign Service Set ID for the wireless system.
•
Short Preamble: The short preamble provides 56-bit Synchronization field to improve WLAN transmission
efficiency. Check Enable button for using Short Preamble, and Disable for using the Long Preamble, 128-bit
Synchronization field, option.
•
Max Transmit Rate: The maximum wireless transmitting rate. Select the desired rate from the drop down list;
the options are auto, or values ranging from 1 to 54Mbps for 802.11g and 802.11 b/g modes, or 1 to 11Mbps for
802.11b mode. The AP uses the highest possible rate when Auto is selected.
•
Transmit Power: The wireless transmitting power of the system. Select among Auto, Lowest, Low, Medium,
High, and Highest from the drop down list.
69
EW-7301APg/EW-7302APg
User Manual