Table of Contents
Advertisement
Table 2.2 DSE Model-number Digit Definitions (continued)
Digit
Digit 20 = Sensors
0 = None
S = Smoke sensor
H = High-temperature sensor
F = Smoke and High-temperature sensors
C = Compressor-overload sensors
A = Compressor, high-temperature sensors
D = Compressor, smoke sensors
K = Compressor, high-temperature, smoke sensors
Digit 21 = Packaging
P = Domestic
C = Export
Digit 22-24 = Factory Configuration Number
Digit 25 = Configuration Code
A = 1
S = SFA
2.2 Component Location
The unit component locations are described in the submittal documents included in the
Drawings
on page 93.
The following table lists the relevant documents by number and title.
Table 2.3 Component-location Drawings
Document Number
DPN003452
DPN003451
2.3 Cooling Configurations
NOTE: All field-installed piping must comply with applicable local, state and federal codes. Refer to
Piping, for detailed information.
2 Nomenclature and Components
Description
Title
Component Location, Typical, Downflow Models, DA050 – DA165
Component Location, Typical, Upflow Models, DA080 – DA085
Submittal
13
Hide quick links:
Advertisement
Table of Contents
