Nokia 6088 User Manual page 67

N6088_UG_EN_060728.fm Page 66 Friday, July 28, 2006 3:50 PM
S e t t i n g s
Note: The PIN code must be obtained form your wireless service provider.
The PIN code is typically provided with your UIM card.
PIN code request
To provide extra security in case your phone is lost or stolen, enable your phone
to request the PIN code when powered on.
1. In the standby mode, select
2. Enter the PIN code, and select OK.
3. Select On.
Call restrictions
Select call restrictions to block or allow numbers for incoming and outgoing calls.
With any numbers entered as allowed numbers, all those entered as blocked
numbers are ignored. With a number blocked, the phone blocks any call from it.
1. In the standby mode, select
2. Enter the security code, and select OK. See "Security settings" p. 65.
3. Select the types of calls you want to restrict:
Restrict outgoing calls—Set restrictions on making calls.
Restrict incoming calls—Set restrictions on receiving calls.
4. Select whether to block or allow numbers:
Blocked numbers—Set the numbers the phone can only block, allowing all the
rest.
Allowed numbers—Set the numbers the phone can only call or receive,
blocking all the rest.
5. Select one of these options: Select,
full), Edit (unavailable with no number added), or
number added).
Note: With restricted calls, you may still call the official emergency
number programmed into your device.
Security level
Your device can be set to different security levels to control device use and
memory settings. In the standby mode, select
66
Menu > Settings > Security > PIN code
Menu > Settings > Security > Call
Add restriction (unavailable with memory
Delete (unavailable with no
Menu > Settings >
request.
restrictions.
Security >