Nokia 6088 User Manual page 61

N6088_UG_EN_060728.fm Page 60 Friday, July 28, 2006 3:50 PM
S e t t i n g s
Date and time auto-update
Auto-update is a network service. See "Network services" p. 69. If your wireless
service provider supports this feature, you can allow the digital network to set
the clock, which is useful when you are out of your home area, for instance when
you have traveled to another network or time zone.
In the standby mode, select
date & time > On, Confirm
If you use the Auto-update of date & time
network, you may be prompted to enter the time manually. Network time will
replace the time and date when you reenter your digital network.
If your battery has been removed or has discharged outside the digital network,
you may be prompted to enter the time manually (when the battery is replaced or
recharged, and you are still outside of the digital network).
■ Voice commands
Before using voice tags, note the following:
• Voice tags are not language-dependent, but depend on the speaker's voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags, and use them
in a quiet environment.
• Very short names are not accepted. Use long names, and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely on voice dialling in all
circumstances.
Hands-free operation
You can set as many as 9 voice commands to enable hands-free operation of
certain features in your device.
Assign a voice tag to a command
Before using voice commands, you must first add a voice tag to the device
function.
1. In the standby mode, select
60
Menu > Settings > Time and date
first, or Off.
option while outside your digital
Menu > Settings > Voice commands.
> Auto-update of