N6088_UG_EN_060728.fm Page 13 Friday, July 28, 2006 3:50 PM
2. Lift the battery upward from it's
compartment.
Note: Always switch off the
device, and disconnect the charger before removing the battery.
UIM (CDMA SIM) card installation
The User Identity Module (UIM), also called the CDMA Subscriber Identity Module
(SIM), card and its contacts can be easily damaged by scratches or bending, so be
careful when handling, inserting, or removing the card. The UIM card slot is built
into the mechanics, located under the battery.
Before installing the UIM card, always make sure that the phone is switched off
and that you have removed the cover and battery.
Keep all UIM cards out of the reach of small children.
1. Remove the back cover and battery first.
2. Keep the beveled corner of the UIM card
facing up and matching along the
corresponding beveled corner of the card
holder.
S e t u p y o u r p h o n e
13