Nokia 6088 User Manual page 22

N6088_UG_EN_060728.fm Page 21 Friday, July 28, 2006 3:50 PM
candidate character, then press
character.
6. Exit predictive: You phone will keep predictive function until you select Back.
You need to input pinyin letter for the next Chinese character.
If all predictive Chinese characters are not your desired, press
the predictive characters, or input the pinyin letter for the next Chinese
character directly.
7. Clear inputted characters: After clearing all pinyin letters and tone marks,
press Clear to delete the character to the left of the cursor; Press and hold
Clear to delete the character to the left of the cursor more quickly. Use the
down and up scroll keys to move the cursor.
Predictive pinyin input example: To input 生日快乐
1. Enter into Create message.
2. Input pinyin letter sheng for 生 : Press 7, 4, 3, 6, 4 in sequence, and finally
press 1 once for the first tone.
3. Select 生 from candidate list, then press OK.
4. Press right scroll key to select 日 from predictive character list, then press OK.
5. Input pinyin letter kuai for 快 : Press 5, 8, 2, 4 in sequence, and finally press
[1] twice for the fourth tone.
6. Select 快 from candidate list, then press OK.
7. Select 乐 from predictive character list, then press OK.
8. You phone will keep predictive function until you select Back.
■ Stroke input method
The strokes constituting Chinese characters have been divided into five
categories: horizontal, vertical, left-falling, dot, and turning. Each category
corresponds to a number key from 1 to 5, respectively.
T e x t e n t r y
OK to select the highlighted Chinese
Back to delete
21