Nokia 6088 User Manual page 65

N6088_UG_EN_060728.fm Page 64 Friday, July 28, 2006 3:50 PM
S e t t i n g s
Memory status
You can view the size of memory available on your device. In the standby mode,
select Menu > Settings >
Automatic keyguard
You can set the keypad of your device to lock automatically after a preset time
delay.
1. In the standby mode, select
keyguard > On or Off.
2. If you select On, Set delay:
3. Enter the delay time (in mm:ss format), and select OK.
When keyguard is on, it may be possible to dial the emergency number
programmed into your device.
DTMF tones
DTMF tones, are the tones that sound when you press the keys on your device
keypad. You can use DTMF tones for many automated dial-up services such as
banking and airlines or for entering your voice mailbox number and password.
DTMF tones are sent during an active call. You can send them manually from your
device keypad, or send them automatically by saving them in your device.
Set type
In the standby mode, select
DTMF tones and one of the following options:
Continuous—Used to set the tone sound for as long as you press and hold a key.
Fixed—Used to send tones of the duration you specify in the
option.
Off—Used to turn off tones. No tones are sent when you press a key.
Set length
You can specify touch-tone length for the
select Menu > Settings >
ms) or Long (350 ms).
64
Phone > Memory status.
Menu > Settings > Phone
is displayed.
Menu > Settings > Phone > DTMF tones
Fixed option. In the standby mode,
Phone > DTMF tones > DTMF tone length
> Automatic
> Manual
DTMF tone length
> Short (95