Red Line Instruments EZ100J Owner's Manual page 8

coupler end of the QRC to the compressed air line hose and plug it
into the adaptor under the gun. Turn the flow-controller counter-
clockwise completely so that it is closed. Please ensure you have
adequate compressed air filters on-line so that clean and dry
compressed air is fed to the powder gun.
Plug in the power cord to a 100-260 V AC outlet. Please ensure that
9.
this outlet (or an extension cord, if you are using one) has a good
quality ground. Plug in the output connection (12 VDC) of the
adaptor to the socket at the base of the gun.In case you believe that
your supply voltage is not clean and steady, please install necessary
surge and spike protectors.
Connect the crocodile clip of the earth (ground) cable to the ground
10.
of the premises in which you are doing the coating. Or, connect the
ground clip to the metal object being coated. Good quality grounding
is essential not only from a safety standpoint, but improves the
quality of powder coating.
T
RED LINE
HE
EZ100J
IS NOW CONNECTED FOR POWDER COATING
.