Red Line Instruments EZ100J Owner's Manual page 11

Routine maintenance:
Always keep your RED LINE

When the powder coating work is over, ground the gun tip to
the ground point.

Switch off the mains switch at the wall outlet. Unplug the
machine from the wall outlet.

Unscrew the cup and store the excess powder in the cup in a
dry place as this powder can be used next time round.

Clean the inside of the gun using compressed air.
 Avoid removing the ForceFeed set of 'J' metal pipe and the
black cup-lid unless you intend to store the set away for a
period of time. Repeated screwing on and removing the black
cup-lid may damage the internal threading of the cup lid-holder
Regular cleaning of the powder spray gun and the powder cups is
normally all that is required to ensure that your system always operates
at peak performance levels.
D
O NOT USE ANY PETROCHEMICAL SOLVENTS OR OTHER CLEANING AGENTS
TO CLEAN THE GUN OR ANY PART OF THE MACHINE AS THIS MIGHT DAMAGE
If any parts need to be replaced, please call for only genuine parts from
your nearest Authorized RED LINE Service Center. Using locally
procured or unauthorized parts may not only affect the performance of
the system, but may also damage the delicate parts and components of
the machine leading to possible unnecessary additional heavy
expenditures ahead.
The manufacturer and/or the distributor have provided the part list and
part-diagram for information purposes only. Neither the manufacturer nor
the distributor makes any kind of representation to the buyer in any way
that he/she is qualified or authorized to make any repairs to the equipment
or change any parts in the equipment. The manufacturer and distributor
expressly states herein that any repairs or parts replacement should not
under any circumstances be carried out by the user, but only by the certified
and licensed technician. The buyer alone assumes all risk, responsibility and
liability arising out of his/her repairs to the original equipment or
replacement of any parts in the equipment or all risks, responsibility and
liability arising out of the buyer's installation of replacement parts in the
equipment.
EZ100J
THE GUN OR OTHER COMPONENTS
CAUTION:
system clean.
.
.