Red Line Instruments EZ100J Owner's Manual page 5

...
N
EVER
 NEVER touch the charging electrode at the tip of the
gun with your bare hands when the machine is 'ON'. If
required to handle the electrodes, always earth
(ground) the electrode first to dissipate any electrostatic
charge build-up that may have taken place.
 NEVER aim the gun away from an earthed object or
point when you trigger it ON
 NEVER inhale the powder that is sprayed. If the
powder recovery system is not efficient to suck away all
oversprayed (excess sprayed) powder, either get that
handled or at least ensure that an appropriate air-filter
is made available for the coater to breath in clean air.
 NEVER use any kind of solvents to clean any gun or its
parts.
 NEVER expose this machine to water or rain
 NEVER open the gun. There are no user-serviceable
or field-serviceable parts inside the gun.
...
A
VOID
 AVOID extended triggering of the gun without
compressed air. Compressed air flow assists in
dissipation of charge from near the gun tip as well as
keeps the electronics inside the gun at an optimum
operating temperature. Continued triggering without
compressed air may lead to an electronic failure of the
gun
 AVOID using locally produced replacement parts – this
may prove to be cheaper in the short term but may
permanently damage the gun and force higher
expenditure later
 AVOID using the equipment in damp or wet areas