Cache - Pantech S100 User Manual

Data Call Type: Press the Left or Right scroll key to select
ISDN or Analog.
Dial Number: Press the [OK] key to input the appropriate
dialup number.
Login ID: Press the [OK] key to input the appropriate login
ID.
Password: Press the [OK] key to input the appropriate
password.
•
GPRS Settings: This menu allows you to set the GPRS network
proxy by inputting the following information.
Gateway/Proxy: If you set the Connection Type to WAP,
Gateway is displayed. If you set it to HTTP,
displayed. Press the [OK] key to display the sub-functions
Address, IP Port then input the appropriate information for
each of the following sub-functions, inputting the information
provided by your service provider.
APN: (Access Point Name.) Press the [OK] key to input the
appropriate APN.
Login ID: Press the [OK] key to input the appropriate login
ID.
Password: Press the [OK] key to input the appropriate
password.
•
DNS Settings: Input the appropriate IP address for the Domain
Name Server. You can input the primary and secondary DNS.
NOTE: This function is available only when your Connection Type
is set to HTTP.
•
Bearer: Select the bearer type for each type of network access.
Press the [Left] or [Right] scroll key to select
GPRS Only.
•
Reset Profile: Press the [OK] key to reset the settings of the
selected profile. Press the [Left] or [Right] scroll key to select
Yes or No.

Cache

This function sets up your phone's cache. This feature is used to
store WAP pages directly on your phone, to display them rapidly
when you return to them.
•
Cache Mode
Proxy is
IP
This function sets up the cache memory check, which verifies
whether the WAP page's information is already stored in your phone's
cache memory.
1. Press the [Menu] Soft key then select
1.WAP then select
2. Select one of the following options.
•
Always Check: The cache is always checked whenever a URL is
loaded.
•
Never Check: The cache is never checked.
•
Clear Cache
This function clears all data stored in the cache (recently visited WAP
pages).
Press the [Menu] Soft key then select
1.WAP then select
8.Connectivity
7.Cache then select 1.Cache
8.Connectivity
7.Cache then select 2.Clear Cache.
GSM Only or
then select
Mode.
then select
79