Cache&Cookie; Storage; Security - Pantech PG-1310V User Manual

enter the edit mode to change the APN.
4.2 Username: Pressing the [ ] key allows you to enter the edit mode to
change the username.
4.3 Password: Pressing the [ ] key allows you to enter the edit mode to
change the password.
5 GSM Settings: This menu allows you to set the GSM network.
5.1 Dial Number: Pressing the [
to change the dial number.
5.2 Line Type: This menu allows you to select the line type. Use the left
or right navigation key to select from the two modes; ISDN and Analogue.
5.3 UserName: Pressing the [ ] key allows you to enter the edit mode to
change the username.
5.2 Password: Pressing the [ ] key allows you to enter the edit mode to
change the password.
6 DNS: Enter the IP address for the Domain Name Server. You may
enter primary and secondary DNS. This function is available only
when you are connected to HTTP.
6.1 DNS1: It stands for Primary DNS. Pressing the [ ] key allows
you to enter the edit mode to change the IP address for DNS1.
6.2 DNS2: It stands for Secondary DNS. Pressing the [
allows you to enter the edit mode to change the IP address for DNS2.
Cache&Cookie
1 Clear Cache: This menu provides the function to clean the data stored
in the Cache (recently visited WAP pages).
2 Clear Cookies: This menu provides the function to clean the
data stored in the Cookie (recently visited WAP pages).

Storage

62
] key allows you to enter the edit mode
You can see the list of the WAP offline pages saved during a WAP browsing.
During a WAP browsing, to save the current page as an offline page, go to
Ⅳ
. Advanced -> 1.WAP
Storage.
Press the [Options] Soft key [
Open: Opens the saved offline page.
Delete: Deletes the saved offline page.
Press the [O] key to open the page.

Security

On selecting the sub-items of this menu, you are asked to input the PIN
code of SWIM. If you fail to input the correct PIN code three times, the
process is cancelled. By default, the PIN code has been set as '1234'.
The SWIM indicates 'Software Wireless Identity Module'.
] key
1.Certificates: Displays the list of the root certificates that have been
saved, and allows you to open each of them to view or delete.
2 Change Auth.
change the PIN code, you must input a new code twice together with
the existing value. You need to input at least 4 numbers, while you can
input a maximum of 20 numbers.
3 Change SignText
4 Session Info: Shows the information of the secure session currently
connected.
-> 1.10 Navigating the WAP Browser and then see
] to:
PIN: Changes the PIN code to use the SWIM. To
PIN: Changes the PIN code of SignText.