Cache; Security Cert; Version - Pantech PG-3810 User Manual

change this item.
- Login ID: Pressing the [OK] key allows you to enter the edit mode to
change this item.
- Password: Pressing the [OK] key allows you to enter the edit mode to
change this item.
GPRS Settings: This menu allows you to set the GPRS network proxy,
-
and it has the following sub-menus:
- Gateway or Proxy: Pressing the [OK] key allows you to access the
submenus such as IP Address, IP Port, Login ID and Password. For
each submenu, pressing the [OK] key lets you enter edit mode to edit
every item provided by the service provider.
- APN: It stands for Access Point Name. Pressing the [OK] key lets you
enter the edit mode to change this item.
- Login ID: Pressing the [OK] key lets you enter the edit mode to change
this item.
- Password: Pressing the [OK] key lets you enter edit mode to change
this item.
DNS Settings : Enter the IP address for the Domain Name Server. You
-
may enter primary and secondary DNS. This function is available only
when you are connected to HTTP.
Bearer: This lets you select the bearer type for each type of network
-
access. Using the left or right navigation key allows you to select from
the two modes: GSM Only and GPRS Only.
Reset Profile: Press the [OK] key to delete the parameter settings of a
-
profile. Choose Yes or No.
66
Note: If Connection Type is WAP, .GSM Setting

1.9 Cache

1.9.1 Cache Mode
Sets up the Cache memory check.
Always Check: The Cache is always checked whenever a URL is
-
loaded.
Never Check: The Cache is never checked.
-
1.9.2 Clear Cache:
This menu provides a function to clean the data stored in the Cache (recently
visited WAP pages).

1.10 Security Cert

You can see the saved security certificate.
Press the [Option] Soft key [ ] to;
Delete: Deletes a security certificate.
Delete All: Deletes all security certificates.

1.11 Version

This function is for viewing the software version of the WAP browser