Removal of Air Filter
1. Removal of Air Filter
Procedure
Step
1. Features
2. Remove the air filters.
Hold the front panel by
1
the tabs on the both
sides and lift it until it
stops with a click.
Keep the front panel
2
open with the support
plate.
2
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Front panel (top)
Slot-in panel
Intelligent
eye lamp
Operation lamp
Signal
Timer lamp
ON/OFF switch
receiver
Support plate
Room temperature sensor
(R5001)
(R5002)
(R5003)
Support point
(R5004)
Si04-858
Points
When the signal receiver
catches a signal from the
remote controller, it
produces beep sound and
the operation lamp blinks.
Removal Procedure