Removing The Transport Brackets - Smeg SLB510 Instructions For Use Manual

Removing the Transport Brackets

The washing assembly is blocked with two metal rods which protect
the machine during transport (fig.1).
Undo the screws on the rear wall (fig. 2).
Remove the squares, rotate them 180 and use them to pull out
the rods (fig. 3).
Disengaged parts may remain at the bottom since they do not
obstruct the operation of the machine (4 rubber hoses and 4 paper
spools).
Use the enclosed plastic caps to plug the holes (fig. 4).
Save the brackets: you may need them later.
6
1
3
Instructions for Use
2
4