Table of Contents
Advertisement
Removing the Transport Brackets
The washing assembly is blocked with two metal
rods which protect the machine during transport
(fig.1).
Undo the screws on the rear wall (fig. 2).
Remove the squares, rotate them 180
use them to pull out the rods (fig. 3).
Disengaged parts may remain at the bottom
since they do not obstruct the operation of the
machine (4 rubber hoses and 4 paper spools).
Use the enclosed plastic caps to plug the holes
(fig. 4).
Save the brackets: you may need them later.
54
1
3
and
2
4
Instructions for Use
Advertisement
Table of Contents
