Wan Connection - Gemtek WX-1516 User Manual

Figure 4-5 Network setup page
4.9.1

WAN Connection

You only need to configure this part of the page to use the Access Point as a
gateway.
1. Check the WAN Connection check box. The settings depend on
information you get from your Internet Service Provider (ISP).
- If your ISP instructs you to "Use DHCP" select the Dynamic radio
button.
- If your ISP gives you IP settings, select the Static IP radio button and
enter the IP address, subnet mask and gateway address the ISP gave you.
- If your ISP gives you PPPoE information, select the PPPoE radio button
31