Creating A Wireless Network - Gemtek WX-1516 User Manual

2. Install the Access Point and connect it to your wired network.
Configure the Access Point from a computer in your existing network:
3. Use KickStart (see chapter 3: 'Connecting to the Access Point'.) to
connect to the Access Point.
In your Web browser, the Web Interface opens.
4. Go to the Network Setup page.
5. If the network uses Auto IP or DHCP: set the LAN settings radio
button to Dynamic.
If you want to use the DHCP server in the Access Point: see section
4.7: 'Using a DHCP server. '
6. Prepare the wireless client(s): install their network card and software.
To add more Access Points: see section 4.8: 'Adding multiple Access
Points to a network.'
4.5

Creating a wireless network

You can use an Access Point to set up a wireless network.
Figure 4-3 Creating an all-wireless network
Install the components of the network:
1. Prepare one computer (install wireless network card and software).
2. Install the Access Point.
Configure the Access Point from the computer you just installed. In
this example, we will use Auto IP.
3. Use KickStart (see chapter 3:'Connecting to the Access
Point') to connect to the Access Point.
In your Web browser, the Web Interface opens.
4. Go to the Network Setup page.
25