Resetting To The Default Factory Settings - Gemtek WX-1516 User Manual

3. Release the reset button when the LED is on constantly.
You can now use the Web Interface to manage the Access Point
again.
2.8.2

Resetting to the default factory settings

If you press the reset button for more than 5 seconds, the Access
Point will be reset to the default factory settings.
All changes you made to the configuration will be lost.
1. Insert one end of a paperclip into the hole for the reset button
and keep it pressed for more than five seconds. After about one
second, the Radio LED (the one on the right) goes from
blinking to being on constantly. After about five seconds, the
LED goes off.
2. Release the reset button when the LED has gone off.
All settings are deleted. You will need to reconfigure the Access
Point.
13