Table of Contents
Advertisement
Page 6 / 18
2.2
Radio controls facilitate and increase the operating efficiency of cranes and machines.
Nevertheless, the operator must thoroughly understand and be in a position to properly
use a radio control system !
!
Read the operating instructions manual carefully and thoroughly before working with
the transmitter for the first time !
!
The operator undertakes to strictly adhere to the instructions and proceedings
described in this manual, as well as to follow the general rules and regulations for
worker safety and accident prevention. Ignoring any such instructions or regulations
could pose a fatal threat to the operator or others.
!
Keep this manual on location and readily available at all times !
!
Only authorized and properly trained personnel may operate the transmitter.
!
Anyone who is under the influence of drugs, alcohol or medication that has a
detrimental effect on a person's reactions may at no time commission, operate,
maintain or repair the transmitter.
!
Before switching on the transmitter ensure that no-one is or can be endangered by
the initiated operation.
!
With the first signs of any malfunction related to the operative safety and reliability
of the device the operator must immediately shut down or not activate the
transmitter. For the purpose of the present manual "shut down" implies :
–
–
–
–
!
Defects must be repaired and sources of interference must be removed
immediately !
!
A defective transmitter may only be repaired by qualified and competent personnel.
Use only original HBC-radiomatic spare parts. The use of any other spares will
render the technical inspectorate approval invalid as well as substantially impede
operative safety.
!
Observe all periodical tests and inspections that are required by law or
recommended in the present operating instructions !
!
When using the cubix transmitter always observe the regulations and instructions
stipulated in the authoritative worker safety and accident prevention regulations
(VBG 9)
–
–
!
Use the transmitter cautiously and properly, in particular when using a transmitter to
radio control a machine or crane for the first time.
Radio Control System
2003-03-11
General Safety Instructions
switching OFF the transmitter,
storing the transmitter in a safe place and ensuring no unauthorized access,
de-energizing the receiver,
unplugging the connection cable on the receiver !
The cubix transmitter has been manufactured in accordance with the regulations
and guidelines stipulated in the German Trade Association's "Safety and
Accident Prevention Regulations for Operating Cranes by Radio Controls" (VBG
9; ZH 1/547) and pr EN 12077-1.
The cubix transmitter has been tested and approved in accordance with EMC
guidelines and complies with the authoritative standards for emitted interference
and interference immunity.
Operating Instructions
Radio Transmitter cubix
BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB
HBC-radiomatic GmbH • D-74564 Crailsheim • Germany
Information and specifications subject to change without notice.
Hide quick links:
Advertisement
Table of Contents
