Table of Contents
Advertisement
Page 14 / 18
4
Note :
Please check the transmitter functions using the cabin or cable controls first !
The transmitter does not
react when switched on.
Transmitter-LED flashes
red 1-time a cycle
Transmitter-LED flashes
red 2-times a cycle
Transmitter-LED flashes
red 3-times a cycle in
combination with a beep
(while charging)
Transmitter-LED flashes
green 3-times a cycle
Radio Control System
2003-03-11
Fault Correction
Problem
− There is no power.
− The battery is not
− Battery is to hot or to
− Battery is defective
− Keyboard (pushbuttons)
−
Radio Transmitter cubix
BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB
Possible Cause
charged
cold
are defective or moisture
inside
HBC-radiomatic GmbH • D-74564 Crailsheim • Germany
Information and specifications subject to change without notice.
Operating Instructions
Remedy
− Charge the transceiver
− Exchange the transmitter.
− Recharge the internal
battery by connecting the
power supply
− Wait til the temperature is
in between 0°C and 40°C
(32°F and 104°F)
− Disconnect the power-
supply from the cubix
− Contact your service-
agent or HBC-radiomatic
GmbH
−
Hide quick links:
Advertisement
Table of Contents
