Maintenance; In The Event Of A Fault - HBC-Radiomatic Cubix Operating Instructions Manual

Operating Instructions
Radio Transmitter cubix
BE-CUBIX_V1.3-FCC.doc.DOC [ Word 2000 ] MB
5
The radio control system is virtually maintenance-free. The following points, however,
should be taken into consideration :
!
Ensure that the STOP pushbutton works smoothly.
Mortar residue and contaminants of any kind can reduce or fully block the switch
function.
!
Never use a high-pressure cleaner or steam jet cleaner to "clean" the transmitter.
Use a soft brush or cloth only !
Note :
Should you have any problems with the radio control system, contact your local
distributor or HBC-radiomatic GmbH.
5.1
Warning :
Never operate a crane or machine with a faulty or defective radio control system !
!
Never try to repair the transmitter electronics ! Opening the transmitter housing
terminates the manufacturer guarantee.
–
–
–
!
To avoid damage during transport, use the original packing supplied with the
transmitter and receiver, otherwise pack securely. Send the consignment to your
distributor or to the following address :
!
Should you chose to deliver a defective radio control system personally to your
distributor or our factory, please call and arrange an appointment.
HBC-radiomatic GmbH • D-74564 Crailsheim • Germany
Information and specifications subject to change without notice.

Maintenance

In the Event of a Fault

Send any defective or faulty equipment to you local distributor or to the
manufacturer. They are experts and have the necessary know-how and OEM
spare parts.
Always send both transmitter and receiver and enclose a detailed description of
the problem.
Do not forget to enclose your address and telephone number so that we can get
in touch with you quickly if necessary.
HBC-radiomatic GmbH
Haller Strasse 49 – 53
74564 Crailsheim
Germany
HBC-radiomatic GmbH
– Customer Services / Repair Service –
Tel.: +49 ( 0 ) 79 51 – 3 93 - 800
Page 15 / 18
Radio Control System
2003-03-11