Sharp R-23AT Original Instruction page 10

MEMORY SETTING
You can change memory programmes for 20 memory banks. Up to three sequences on any power level can be
programmed for each memory. See cooking sequence chart on page GB-11 for time maximums.
Setting time and power level
Example : Suppose you want to set 4 minutes at 60 % for the 1st sequence and 2 minutes at 30 % for the 2nd
sequence for 1 serving in the memory 1.
Step
1 Choose set mode.
2 Choose memory number.
3 Touch MANUAL/REPEAT key.
4 Enter desired cooking time for 1st se-
quence.
5 Touch MICROWAVE POWER SETTING
key.
6 Choose desired power level for 1st
sequence.
7 Touch MANUAL/REPEAT key.
8 Enter desired cooking time for 2nd
sequence.
9 Touch MICROWAVE POWER SETTING
key.
10
Choose desired power level for 2nd
sequence.
11 Complete memorizing.
NOTE:
1. If you want to set memory 11-20, touch the desired NUMBER key twice. Ex. 11= 1 X 2, 12= 2 X 2...
2. If 100% is required, it is not necessary to set the microwave power.
3. If the cooking time exceeds the max. time, the display will show EE9.
4. At Step1, any audible signals will not sound when the SET key is touched fi rst and then an audible signal will
sound when the SET key is touched second.
Action Press key
X 2
within 2 sec.
1
4 0 0
6
2 0 0
3
X 2
GB-9
Display
NUMBER
NUMBER will fl ash on and off.
NUMBER
1
NUMBER
1
NUMBER
POWER
1
POWER will fl ash on and off.
NUMBER
POWER
1
NUMBER
2
NUMBER
POWER
2
POWER will fl ash on and off.
NUMBER
POWER
2
%
%
%
%