Assumed Information; Where To Get Help - Malvern Hydro 2000 G User Manual

Introduction to this manual

Assumed information

All pictures and text show the Hydro 2000G unless information is specific to the
Hydro 2000S.
Naming convention
Within this manual:
Menu commands
Menu commands from the Malvern software are referred to in the form main
menu-menu item. As an example, the command Configure-New SOP refers to
selecting the New SOP item in the Configure menu. The same rules apply for
sub-menus of sub-menus, so that Tools-Options-Instrument Port refers to the
Instrument Port item in the Options sub-menu, which itself is a sub-menu of
the Tools menu. Menu commands are always shown in bold text.

Where to get help

Full details on where and how to obtain help can be found in Chapter 1 of the
main User Manual.
The Essentials Manual gives information on the following:
Hydro 2000G/S
The Mastersizer 2000 optical bench is referred to as "the optical bench" or "the
instrument".
The sample dispersion units are referred to in full (e.g. "the Hydro 2000G") or
as "the dispersion unit".
The combination of the optical bench, one or more dispersion units and the
computer is referred to as "the system".
Site requirements.
Health and Safety.
Maintenance.
Installation (in case the system has to be moved after its initial installation by
Malvern Instruments personnel).
Chapter 1
Page 1-3