Specific Safety Rules - PROCRAFT 511307 Operating Instructions Manual

eye protection. Dust mask, non-skid
safety shoes, hard hat, or hearing
protection must
appropriate conditions.
Tool Use and Care
1. Use clamps (not included) or other
practical ways
support the workpiece to a stable
platform. Holding the work piece by
hand to against your body is unstable
and may lead to loss of control.
2. Do not force the tool. Use the
correct tool for your application.
The correct tool will do the job better
and safer at the rate for which it is
designed.
3. Do not use the power tool if the
Power Switch does not turn it on or
off. Any tool that cannot be controlled
with the Power Switch is dangerous
and must be replaced.
4. Disconnect the Power Cord Plug
from the power source before
making any adjustments, changing
accessories, or storing the tool.
Such preventive
reduce the risk of starting the tool
accidentally.
5. Store idle tools out of reach of
children and
persons. Tools are dangerous in the
hands of untrained users.
6. Maintain tools with care. Keep
cutting tools maintained and clean.
Properly maintained tools are less
likely to bind and are easier to control.
Do not use a damaged tool. Tag
damaged tools "Do not use" until
repaired
7. Check for misalignment or binding
of moving parts, breakage of parts,
and any other condition that may
be used for
to secure and
safety measures
other untrained
affect the tool's
damaged, have the tool serviced
before using. Many accidents are
caused by poorly maintained tools.
8. Use only accessories
recommended by the manufacturer
for your model. Accessories that may
be suitable for one tool may become
hazardous when used on another tool.
Service
1. Tool service must be performed only
by qualified repair personnel. Service
or maintenance
unqualified personnel could result in a
risk of injury.
2. When servicing a tool, use only
identical replacement parts. Use of
unauthorized parts or failure to follow
maintenance instructions may create a
risk of electric shock or injury.

SPECIFIC SAFETY RULES

1. Maintain labels and nameplates on
the tool.
These
information. If unreadable or missing,
contact TOOLEX INDUSTRIAL for a
replacement.
2. Always wear the approved safety
impact eye goggles and heavy work
gloves when suing the tool. Using
personal safety devices reduce the
risk for injury. Safety impact eye
goggles and heavy work gloves are
available from Harbor Freight Tools.
3. Maintain a
environment. Keep the work area
well lit. Make sure there is adequate
surrounding workspace. Always keep
the work area free of obstructions,
grease, oil, trash, and other debris. Do
not use a power tool in areas near
flammable chemicals,
operation. If
that are
performed by
carry important
safe working
dusts, and
Page 6