Additional Information - NEC Express5800 A2040d Initial Operation Verification Manual

2.2. Logon to the server
Depending on your installed OS you will either be presented a graphical interface to login or a
CLI login prompt. In any case initial login credentials are:
Username : root
Password : hana
2.3. Start the SAP HANA Instance
1. Change user to the <sid>adm and start HANA:
su - <sid>adm
HDB start
2. Check the SAP HANA Instance status, all should be "GREEN".
Please note that HANA startup takes some time.
sapcontrol –nr <instance no> -function GetProcessList
3. Stop the Server
3.1. Stop the SAP HANA Instance
1. Change user to the <sid>adm and stop HANA:
su - <sid>adm
HDB stop
2. Check the SAP HANA Instance status, it must be "GRAY, Stopped".
Please note that HANA shutdown takes some time.
sapcontrol –nr <instance no> -function GetProcessList
3.2. Power off the server
Power off the server. Use the following command on terminal:
shutdown –h now

4. Additional information

For additional information about the hardware please review the "User's guide" for A2040d
available at www.58support.nec.co.jp/global/download
4 © NEC Corporation 2017