NEC Express5800 A2040d Initial Operation Verification Manual page 2

Hide thumbs Also See for Express5800 A2040d:

1. Preparation

1.1.

Check the Power Plugs

Please check that all power plugs are connected to the back of server.

1.2.

Check the NICs

1.2.1. Production Network

Please check that all Network Interface Cards are connected as required. This means the two

dual port adapters mounted in slots number 9 and 16 should be connected. These 4 1GB ports

are bonded by the OS driver. For your reference please see the numbers on top of the PCI slot.

The below image does not contain NICs in these slots.

1.2.2. Management Network

Please check that at least one of both management adapters (MGB1 Management and MGB2

Management) is connected to the network. With this connection you can monitor your hardware

health.

1.3.

External Storage (JBOD)

Please connect the external storage to the 2

The RAID controller is mounted in PCI slot 12. Please connect its port "A" to port "0" of the JBOD.

Please connect two power cables to the external storage as well.

RAID controller.